50 Helpful Pike Fishing Tips (That Will Catch You More Fish!)

Advertisements

Are you ready to take your pike fishing skills to the next level? Look no further! In this article, we’ve compiled 50 helpful tips that will not only increase your chances of catching more pike, but also make your fishing experience more enjoyable.

From choosing the right gear to mastering various fishing techniques, we’ve got you covered. Whether you’re a beginner or an experienced angler, these tips will provide you with valuable insights and strategies to up your game.

We’ll guide you through selecting the perfect rods and reels, finding the best fishing locations, and using different rigs and techniques for both lure and bait fishing.

We’ll also share important safety and handling tips to ensure the well-being of both you and the fish.

So grab your gear, get ready to immerse yourself in the world of pike fishing, and let’s reel in some unforgettable memories together!

Key Takeaways

  • Choose the right rods and reels, such as medium-heavy action spinning rods and spinning reels with a line capacity of 200-250 yards of 25-30lb braid.
  • Use wire leaders or thick fluorocarbon leaders to prevent bite-offs, and consider using rubber mesh landing nets and unhooking mats for easy handling of pike.
  • Fish close to vegetation and margins, target areas with reeds and overhanging trees, and prioritize fishing during early morning, evening, and mild weather conditions.
  • Experiment with different lure sizes, shapes, and types, try trolling over open, deep water in lakes, and use various rigs and techniques like float rigs for live bait and basic running rigs for dead bait.

Choosing the Right Gear

When choosing the right gear for pike fishing, it’s important to consider the different types of rods you’ll need. Start by purchasing a conventional spinning rod and a medium-heavy action spinning rod for most pike lures. These rods will provide you with the versatility and control you need to catch more pike.

However, don’t forget to also get a longer heavy action spinning rod for trolling and float fishing. This type of rod will give you the strength and power necessary for these specific techniques.

In terms of fishing equipment maintenance, it’s crucial to buy rods with a decent backbone. This will ensure better casting and control, allowing you to make accurate and powerful casts.

Additionally, when it comes to reels, invest in a spinning reel and baitrunner with a few ball bearings. These ball bearings will provide smooth operation, making it easier to reel in those big pike.

For your spinning reel, look for a line capacity of 200-250 yards of 25-30lb braid. This will give you the strength and durability needed to handle the aggressive nature of pike.

As for your baitrunner, it should hold 200-250 yards of 15-18lb mono. This line capacity will be sufficient for most pike fishing situations.

By carefully selecting your rod and reel, you’ll be well-equipped to tackle any pike fishing adventure.

Location and Timing

Fish close to areas with vegetation such as reeds, lily pads, weeds, grass, and overhanging trees to increase your chances of catching pike. These spots serve as prime ambush points for pike, allowing them to hide and strike unsuspecting prey.

To maximize your success, it’s important to consider the best weather conditions and time of day. Pike are more active during mild temperatures and pre-storm fronts, so prioritize fishing on mild and cloudy days. Additionally, early morning and evening are prime times for active pike.

During these periods, smaller fish become less careful, increasing your chances of a successful catch. Embrace the stillness of the morning or the golden hour of the evening, and immerse yourself in nature’s beauty as you reel in your prize.

Techniques for Lure Fishing

To increase your chances of success when lure fishing for pike, consider using a variety of lure sizes, shapes, and types to adapt to the preferences of the fish. Pike can be selective at times, so having a diverse range of lures in your tackle box will give you more options to entice them. Experiment with different colors, patterns, and movements to see what triggers their predatory instincts.

To help you visualize the versatility of lure selection, here is a table showcasing various lure types and their potential effectiveness:

Lure Type Advantages Disadvantages
Crankbaits Realistic action Can get snagged
Spinnerbaits Flashy and noisy May spook fish
Soft Plastics Lifelike movement Can tear easily
Topwater Baits Exciting strikes Weather-dependent
Jerkbaits Irresistible twitching Requires skill in retrieval

When casting, remember to vary your retrieval speed and depth to mimic the erratic movements of injured prey. Additionally, using a pause-and-go technique can entice pike into striking. Stay observant and adapt your casting techniques to the changing conditions of the water, maximizing your chances of a successful lure fishing experience.

Techniques for Bait Fishing

When bait fishing for pike, try using a variety of bait types and sizes to attract the fish based on their preferences. Pike fishing bait selection is crucial to entice these elusive predators. Experiment with different options such as live bait, dead bait, or even artificial lures designed to mimic the movements of natural prey.

To maximize your chances of success, consider the following best bait presentation techniques:

  1. Vary the depth at which you fish your bait to target different areas of the water column where pike may be lurking.

  2. Use a float rig to suspend your bait at a specific depth, allowing it to move freely and attract attention.

  3. For bottom fishing, employ a running rig to allow the bait to move naturally with the current, enticing nearby pike.

By diversifying your bait selection and utilizing these presentation techniques, you can increase your chances of landing more pike and create an exciting and rewarding fishing experience. So, get out there, explore different options, and let the pike guide you to the ultimate bait choice!

Safety and Handling

Be sure to have a pair of long nose pliers in your tackle box for safe unhooking of pike. These fish have sharp teeth and a powerful bite, so it’s important to handle them with care. Using protective gear, such as jaw spreaders and armor gloves, can help you safely handle the pike’s powerful jaws and protect your hands from their sharp teeth. Additionally, having a wire cutter on hand is useful for removing deep hooks if necessary. When it comes to weighing your catch, it’s best to use a weigh sling instead of hanging the fish, as this can cause harm. Remember, proper handling of big catches is not only important for the safety of the fish, but also for your own safety. So, be prepared and take the necessary precautions to ensure a successful and safe fishing experience.

See Also  Is Fishing With Live Bait Illegal? (A State-By-State Guide)
Protective Gear Importance
Jaw Spreader Safely handle pike’s powerful jaws
Armor Gloves Protect hands from pike’s sharp teeth
Wire Cutter Remove deep hooks if necessary
Weigh Sling Safely weigh pike without harming them
Hand Towel Handle slimy pike with ease

Using Float Rigs

When fishing for pike, using a float rig is a great strategy to cover a larger area of water and increase your chances of success. Float rigs offer several benefits for pike fishing.

Firstly, they allow you to suspend your bait at the desired depth, making it more visible to the pike and increasing the chances of getting a bite.

Additionally, float rigs enable you to cover more water as you can cast them out and let them drift along, exploring different areas of the lake or river.

To set up a float rig, attach a appropriately sized float to your mainline, and then add a weight below it to keep the float balanced. Adjust the depth by sliding the float up or down the line. Experiment with different depths until you find what works best.

Using float rigs can be a game-changer in your pike fishing adventures, allowing you to target more fish and increase your chances of a successful catch.

Using Running Rigs

To effectively use running rigs for pike fishing, follow these steps:

  1. Attach a weight to your mainline below a swivel.
  2. Tie a length of line to the other end of the swivel to attach your hook and bait.

Using running rigs offers several advantages:

  • They allow your baitfish to move freely, mimicking natural movement and attracting the attention of hungry pike.
  • They provide clear bite indication, making it easier to detect when a pike has taken the bait.
  • Cutting the bait in half can increase scent dispersion, enticing pike to strike.

When setting up your running rig, keep the following tips in mind:

  • Ensure that the weight is heavy enough to keep your bait near the bottom where pike often lurk.
  • Use two treble hooks for better hooking chances.
  • Wait a few seconds before striking to set the hook properly.

By using running rigs correctly, you can maximize your chances of landing more pike on your fishing trips.

Hooking and Striking

When hooking and striking pike, make sure to wait a few seconds before setting the hook to increase your chances of a successful catch. This allows the pike enough time to fully take the bait into its mouth and ensures a solid hookset. Patience is key in this step, as prematurely setting the hook can result in a missed opportunity.

To improve your strike rate when fishing for pike, it’s important to understand the proper technique for setting the hook. Here are a few tips to help you master this skill:

  1. Keep a firm grip on the rod and be ready to strike at any moment.
  2. When you feel a strike, resist the urge to immediately jerk the rod.
  3. Instead, wait for a brief pause or a slight movement in the line.
  4. Once you’ve detected this, quickly and firmly jerk the rod upwards to set the hook.
  5. Maintain steady pressure on the fish to prevent it from shaking the hook loose.

By following these guidelines, you’ll greatly increase your chances of successfully hooking and landing pike on your fishing trips. Happy fishing!

Using Baitrunner Reels

Using a baitrunner reel can greatly enhance your fishing experience. Here are some tips for maintaining and maximizing the benefits of baitrunner reels:

  1. Smooth Line Release: Baitrunner reels have a secondary drag system that allows the line to be released smoothly when a fish takes the bait. This prevents the fish from feeling resistance and improves the chances of a solid hookset.

  2. Easy Line Control: Adjusting the tension on the line is a breeze with a baitrunner reel, giving you better control over the fight. This is especially helpful when dealing with larger pike that put up a strong fight.

  3. Prevent Line Breaks: The baitrunner feature helps prevent line breaks by allowing the fish to take the bait and run without applying excessive pressure. This reduces the risk of the line breaking due to sudden jerks or the pike’s powerful movements.

  4. Versatility: Baitrunner reels are versatile and can be used for both float fishing and bottom fishing techniques. This makes them a valuable tool for targeting pike in different fishing scenarios.

By incorporating a baitrunner reel into your fishing setup and following these tips, you can increase your chances of success and have a more enjoyable time on the water.

Being Mobile and Exploring

Now that you’ve learned about using Baitrunner reels, it’s time to explore the importance of being mobile and exploring different fishing spots. Pike can be elusive creatures, so it’s essential to move around and find their hiding places. By being mobile, you increase your chances of finding active pike and catching more fish.

One way to be successful in your exploration is by mastering proper casting techniques. This skill allows you to cover a larger area and reach those hard-to-reach spots where pike may be lurking. By honing your casting skills, you can present your bait in a way that entices pike to strike.

Additionally, using a fish finder can greatly enhance your fishing experience. A fish finder helps you locate underwater structures, schools of baitfish, and of course, the pike themselves. This tool provides valuable information that can lead you to the most productive fishing spots.

By being mobile and using proper casting techniques, coupled with the benefits of a fish finder, you’ll have a greater chance of finding and catching more pike. So, get out there, explore different areas, and let your fishing adventures unfold!

Pros of Being Mobile Pros of Using a Fish Finder
Discover new fishing spots Locate underwater structures
Cover a larger area Find schools of baitfish
Increase chances of finding active pike Pinpoint pike hotspots
Adapt to changing conditions Save time by targeting productive areas
Explore different fishing techniques Increase overall fishing success

Conclusion

Congratulations! By following these helpful tips, you are well on your way to becoming a pike fishing pro. Armed with the right gear, such as medium-heavy action spinning rods and wire leaders, you are ready to tackle these fierce predators.

Remember to fish in the right locations, targeting areas with vegetation and prioritizing mild and cloudy days.

Whether you prefer lure fishing or bait fishing, there are techniques and rigs that will help you succeed.

And of course, always prioritize safety and handle these powerful fish with care.

Now, go out there and explore the world of pike fishing with confidence and excitement!

kimberly
About the author

Kimberly is an experienced angler and outdoor enthusiast with a passion for all things fishing. She has been honing her skills on the water for over 7 years, mastering various techniques and tactics for both freshwater and saltwater fishing.

Leave a Comment